CMOS Bumper Camera & On Dash Monitor

Budget System 119.90

Welcome to our store and thank you for viewing this rearview camera and monitor product.

We Offer a Nationwide Fitting Service.

This wonderful CKO PK2.5" CMOS rearview camera and monitor system will not break the bank and provide you with complete peace of mind while reversing your much loved vehicle or craft.

This CKO CMOS MVB flush-mount mirror image camera can be discreetly drilled into the bumper or door skin (similar to a parking sensor), for clear viewing purposes. The camera is waterproof but will require to be sealed further with silicon on fitting.

This black anodized, water resistant ,metal bodied, CMOS camera, is able to be easily flush mounted  on a surface by simply drilling a 25mm hole.  Also provided with inserts to allow for angled applications, this camera can be used as a door peep hole camera, car rear vision camera and other applications that require an unobtrusive camera.

The high resolution colour monitor and camera will give you perfectly clear pictures and will enable you to park or berth with confidence. The CKO2.5" monitor is very small and discreet allowing innumerable installation capabillities and will not distract you from your forward viewing.

At Ice Blue Connections & Parkmyauto, all of our products are of the highest quality, distributed from the UK, are EU approved, duty paid and are backed-up with a 12 month repair & replacement parts warranty - we would like to think you wont need this but just in case!

CKO PK2.5" Monitor Specifications:-

• 2.5” TFT-LCD Rear View Monitor
• Pixel Resolution: 1440 (H) x 234 (V)
• Display Format 4.3 Ratio
• Brighhtness & Colour Control
• Dimensions: 21x21x7cm
• 2 x Video Input
• Aspect Ratio: 4:3
• Operating Voltage: DC 8V-15V,
• Operating Temperature -20 Degree Cent - + 60 Degree Centigrade
• Power Consuption 2W

CKO CMOS MVB Camera Specifications:-

• Image Device - OV7910
• TV System - Pal
• Effective Pixels - 628 x 582 pixels.
• Sensing Area - 5.78mm x 4.19mm.
• Scanning System - 2.1 Interlace.
• Sync. System - Internal.
• Resolution: 380 TV lines
• Horizontal Sync Frequency - 15,625kHz.
• Vertical Sync Frequency - 50Hz.
• Minimum Illumination: 3Lux.
• Video Output: 1.0Vp-p into 75Ohm
• Gamma Consumption - 3.45.
• AGC - Auto.
• S/N Ratio - >48dB.
• White Balance - Auto.
• BLC - Auto.
• Current Consumption - Max 60mA.
• Power Supply - DC12~16V.
• Operating Temperature -  -10degC ~46degC RH95% Max.
• Storage Temperature -   -30degC ~ 60degC RH95% Max.
• Lens: f=3.6mm / F=2.0.
• Lens Angle - 92 degrees.
• Dimensions: 29mm x 60mm
• Leads:Yellow Socket is connected to Video Output.
• Other Connector is used for Power Supply - DC12~16V.

Flush Mount Bumper CCD Colour Camera supplied with 5M cable, + 12V DC Plug.

Suitable For The Following:-

• Private Cars
• Light Goods & Van Transport
• Minibuses
• MPV
• Campers, Caravans & Motorhomes
• Trailers & Horse Boxes
• Marine Craft

Can Be Used With 24V Vehicles, a Voltage dropper will be required.

Just to Let you know, we can offer you a nationwide fitting service. Give us a call in Edinburgh for a quote on: 0131 553 8855

Your custom is the reason we are here - Thank you, and please come back.